|
WIRE ROPE HOIST
Available range: upto 15.0 Tons.
Easily interchangeable & available Spares
Guarantee
Electric Wire Rope Hoist.
Designed & Constructed, to give higher life of the equipment.
Rope Drum
is fitted in the Drum Housing constructed inline with the Side Plates
supporting the Rope Drum. This, instead of Long distance bolts gives
better strength & lesser skewing effect to the drum. Type Hoists are designed with Long Distance Bolts.
Modular Construction:
Easily accessible, designed with - separate independent units Motor
Side (Driving Part), Gearbox (Intermediate), Mechanism Side (Driven
Part) & Control Unit. Giving ease of maintenance to the user.
Supplied
with options of fix suspension (no travel only hoisting), pull-push
or geared (manual travel) or electrically operated traveling of the load.
Driven by
Conical Rotor Motor Start Motor (Make: Anker) for MI-0 Hoist. For
Other models, Squirrel Cage Induction Motor fitted with Electromagnetic
Brake are used.
Manufactured as per IS: 3938 (Indian Standard) for Class II & Class IV (medium duty & heavy duty) application.
Tested at 25 % Overload
Hooks: As per IS: 15560 - 2005, supported on Thrust Bearings.
Rope Drum:
Made from Seamless pipe & grooves are at approx. 2/3rd of height of
the wire rope diameter to have proper sitting in the drum.
Rope Guide: Providing proper guide along the axis of Rope slides & is easy to dismantle from rope drum while maintenance.
Gears:Alloy
Steel Material, precise machined, gear hobbed & case hardened duly
annealed. Spur / Helical combination to provide strength &
smooth operation. Gears shall be lubricated with a semi-liquid grease /
oil as per the designs.
Motor:
Conical Rotor Motor operating on 415 Volts, 3 Phase, 50 Hz AC Supply
with In-built braking mechanism (For MI-0 Hoist) & Hoist Duty,
Squirrel Cage Induction Motor with high starting torque operating on
415 Volts, 3 Phase, 50 Hz AC Supply with Electromagnetic Brake.
Continuously rated, Suitable for frequent reversing & braking.
Braking Mechanism: Disc type, Spring Loaded acting at any load position (For MI-0 Model) & A.C. Electromagnetic Brake for Other Models.
Control Panel Unit:
Totally enclosed to protect from Weather / Dust, giving output at 24
Volts to the Operational Control Station (Push Button Station).
Operational Control Station:
Suspended from Hoist with a Cable & supporting Wire rope with two
push buttons extendable to four / six push button station. Operated
with 24 Volts.
Overload Relay: Provided for protection to Motor.
Limit Switches:
Provided to control movement of Hook in Hoisting motion at decided
levels activated by Rope Guide for Upper limit, Lower limit &
Overlowering.
Special
Hoists with Creep Speed arrangement, Special Control Panel Station,
higher lift, Short Head room also can be supplied at an extra cost.
|
