|
Category: Material Handling Equipment
Sub Category: Chain Electric Hoist.
Designed in two separate independent units Motor Side (Driving Part) & Mechanism Side (Driven Part).
Driven by Conical Rotor Motor Start Motor (Make: Anker).
Duty: Class II, 40% Intermittent duty.
Manufactured as per IS: 6547 (Indian Standard) Tested at 25 % Overload.
Hooks: As per IS: 15560 - 2005.
Load Chain: 8 mm, Grade 80, Alloy Steel Material as per IS: 6216.
Load Chain Wheel: S.G. Iron Casting Accurately pocketed with proper sitting in the Aluminum Chain Guide.
Chain Guide:
Aluminum Accurately
manufactured with Machine matched recession to provide Load Chain
precisely guided movement around the load chain wheel. Designed in two
separate halves ensuring ease
in assemble/ dismantle or operation stage.
Gears:
Alloy Steel Material, precise machined, gear hobbed & case hardened duly annealed. Spur / Helical
combination to provide strength & smooth operation. Gears shall be
lubricated with a semi-liquid grease instead of oil, which is less
likely to leak, eliminates oil level checks and clings to the gears
even after long idle periods.
Motor:
Conical Rotor Motor operating
on 415 Volts, 3 Phase, 50 Hz AC Supply with In-built braking mechanism.
Braking Mechanism: Disc type, Spring Loaded acting at any load position.
Control Panel Unit: Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station).
Operational Control Station:
Suspended from Hoist with a Cable & supporting Wire rope with two push buttons
extendable to four / six push button station. Operated with 24 Volts.
Overload Relay: Provided for protection to Motor.
Limit Switches:
Provided to control movement of Hook in Hoisting motion at decided
levels activated by Lower Hook & End Stop. Prevents Accidents due
to Over-hoisting & Over-lowering.
|
Weight of Hoist at 3 Mtr. Lift: 35 Kgs.
|
|
Extra Weight per Meter: 1.2 Kgs.
|
|
No. of Falls of Load Chain: 1 Falls
|
|
Overall Dimensions: 560 x 410 x 265 mm (Head room x Other Dimensions)
|
|
Headroom (Hook Suspension): 560 mm
|
|
Headroom (With Monorail Geared Traveling Trolley): 600 mm
|
|
Headroom (With Monorail Electric Traveling Trolley): 620 mm
|
|
Motor: 0.5 HP, 3 Phase, 1440 RPM, Class F, 40% Intermittent Duty, Induction Motor
|
|
Hoisting Speed: 6.4 Mtr./ Min
|
|
Exceptions to EH2 Hoist: 6.3 mm, Grade 80, Alloy Steel Material Load Chain
|
|