Category: Material Handling Equipment

Sub Category: Chain Electric Hoist

Designed in two separate independent units Motor Side (Driving Part) & Mechanism Side (Driven Part).

Driven by Conical Rotor Motor Start Motor (Make: Anker)

Duty: Class II, 40% Intermittent duty

Manufactured as per IS: 6547 (Indian Standard) Tested at 25 % Overload

Hooks: As per IS: 15560 - 2005

Load Chain: 8 mm, Grade 80, Alloy Steel Material as per IS: 6216.

Load Chain Wheel: S.G. Iron Casting Accurately pocketed with proper sitting in the Aluminum Chain Guide.

Chain Guide: Aluminum accurately manufactured with Machine matched recession to provide Load Chain precisely guided movement around the load chain wheel. Designed in two separate halves ensuring ease in assemble / dismantle or operation stage.

Gears: Alloy Steel Material, precise machined, gear hobbed & case hardened duly annealed. Spur / Helical combination to provide strength & smooth operation. Gears shall be lubricated with a semi-liquid grease instead of oil, which is less likely to leak, eliminates oil level checks and clings to the gears even after long idle periods.

Motor: Conical Rotor Motor operating on 415 Volts, 3 Phase, 50 Hz AC Supply with In-built braking mechanism

Braking Mechanism: Disc type, Spring Loaded acting at any load position.

Control Panel Unit: Totally enclosed to protect from Weather, giving output at 24 Volts to the Operational Control Station (Push Button Station).

Operational Control Station: Suspended from Hoist with a Cable & supporting Wire rope with two push buttons extendable to four / six push button station. Operated with 24 Volts.

Overload Relay: Provided for protection to Motor.

Limit Switches: Provided to control movement of Hook in Hoisting motion at decided levels activated by Lower Hook & End Stop. Prevents Accidents due to Over-hoisting & Over-lowering.